Menu
 

Concrete Driven Piles

As CWP have firmly cemented their position as reliable manufacturers throughout the industrial and agricultural markets, they have supplied to a growing number of respected companies, especially within the housing industry. Originally producing concrete beam foundations for companies such as Van Elle, the team made the decision to begin manufacturing concrete driven piles.

A cost-effective foundation solution, our concrete driven piles can be used for all types of construction including underpinning houses and light buildings, foundations for new buildings and marine construction.

CWP driven piles are an effective solution for difficult ground conditions such as contaminated or “brown-field” sites where the disposal of soil is difficult. Precast Piles are reinforced with pre-formed steel cages and may also be coated with a bituminous layer to combat very aggressive ground conditions. CWP Concrete have opted for a standard square pile with a slight taper to make the de-moulding process optimal.

OUR CONCRETE DRIVEN PILES

CWP focus on two sizes of standard precast piles commonly used within the housing sector: a 200mm x 200mm square pile and a 250mm x 250mm square pile. Both variations are reinforced with a 12mm steel helical cage and produced in standard lengths of 3, 6, 9 and 12m, though we also stock 5 and 7m.

Our design of precast concrete piles has a universal bar and dowel jointing system with steel crack rings to either end of the units. This allows for any configuration of units to meet the required depth of ground on your project, and also allows each length of pile to be joined easily and secured in place with a 19mm steel pin or dowel.

FEATURES AND BENEFITS:

Resists compressive, uplift and lateral loads.

Extensive range of pile sizes.

Piles may be installed to significant depths >40m.

Rapid follow-on construction

Unaffected by ground water.

No spoil generation.

Noise and vibration to be considered and managed.

USES:

Can be used for all types of construction, particularly in aggressive soil conditions.

Well suited to sites where the ground conditions are highly variable as they are driven to a set or pre-determined resistance.

A good foundation choice when you have very thick layers of soft soil and/or a high water table that would be problematic for a traditional drilled pile.

Accreditations

This site uses cookies.
ConfigureHide Options
 
Read our privacy policy

This site uses cookies for marketing, personalisation, and analysis purposes. You can opt out of this at any time or view our full privacy policy for more information.